PKM 1 MOLLE
The bag is designed to carry a box of one hundred cartridges for a 7.62 PKM machine gun/ PKP panel or tape for 250 rounds.
The bag consists of three parts: the face, the reinforcement lining and an internal t-shaped plastic insert with a thickness of 1 mm.
The insert is attached to the top of the pocket with rivets, protects it from being wiped by bullets and provides rigidity of the bag.
On the sides and on the front wall of the bag, you can attach additional equipment (hand grenades, RSP/ROP), on the mount PALS (MOLLE). The bag is closed with a valve that protects it from dust, dirt,and moisture. A valve with a SILENT QRF (Quick Release Fastener) of the 1958 model. This clasp is reliable, as it is made of stainless steel, duralumin, polyamide belts.
The side walls of the valve taper to the back wall, which, combined with the plastic frame in front of the valve, makes it easy to open with one hand. The most loaded seams with triple stitches. At the bottom, a grommet is installed to remove moisture. For shoulder support straps, two D – shaped metal rings are sewn on the top of the bag. The bag is attached to platforms, vests and belts with the PALS (MOLLE) system with two vertical and three horizontal belts. Vertical belts have rigid inserts and are fastened to the bottom of the bag with metal buttons.
Dimensions of the bags:
Total height-260 mm;
Front wall height-200 mm;
Length (on the front wall) - 150 mm;
The bag consists of three parts: the face, the reinforcement lining and an internal t-shaped plastic insert with a thickness of 1 mm.
The insert is attached to the top of the pocket with rivets, protects it from being wiped by bullets and provides rigidity of the bag.
On the sides and on the front wall of the bag, you can attach additional equipment (hand grenades, RSP/ROP), on the mount PALS (MOLLE). The bag is closed with a valve that protects it from dust, dirt,and moisture. A valve with a SILENT QRF (Quick Release Fastener) of the 1958 model. This clasp is reliable, as it is made of stainless steel, duralumin, polyamide belts.
The side walls of the valve taper to the back wall, which, combined with the plastic frame in front of the valve, makes it easy to open with one hand. The most loaded seams with triple stitches. At the bottom, a grommet is installed to remove moisture. For shoulder support straps, two D – shaped metal rings are sewn on the top of the bag. The bag is attached to platforms, vests and belts with the PALS (MOLLE) system with two vertical and three horizontal belts. Vertical belts have rigid inserts and are fastened to the bottom of the bag with metal buttons.
Dimensions of the bags:
Total height-260 mm;
Front wall height-200 mm;
Length (on the front wall) - 150 mm;